Payment & Shipping Terms:
|Material:||QT700-2 And Q235 Ect||Brand Name:||Qingdao Kechengyi|
|Place Of Origin:||Qingdao,China ( Mainland )||Model Number:||According To Customer|
|Color:||According To Customer||Quality:||High Reputation|
bucket elevator parts,
roller conveyor systems
Driving mechanism,Its material is Q235,for the Bucket Conveyor System:
Conveyor drive mechanism introduction: include stepless speed regulating motor, machine of decelerate of hard tooth flank, driving mechanism, big sprocket, small sprocket and chain, sprocket for 2 # high wear-resisting material iron base alloy, surface quenching after processing. Drive chain for high strength sleeve roller chain, sprocket and chain size should be placed in a fully enclosed inside the shield. Drive motor, reducer should meet the requirements of rain, prevent dust prevention, the protection grade is not lower than IP55, insulation class F. Drive motor can start under 85~100% of the rated voltage and rated power and can accelerate the start-up equipment, motor adopts stepless speed regulation.
The debug and operation:
Before you operate the conveyor, we need observe motor steering, steering motor cooling fan, if it is correct then run continuously. If the equipment stop when running, the frequency converter will alarm on the control box and the frequency converter in the cabinet jump alarm, check if the transmission parts connected exception. If any abnormal,it must rule out the alarm and then continue to run.
If the crowded touch in the hopper when running, you must adjust the hopper position.
Cumulative running 3 hours later, we should tighten nut hopper retightened again, pay attention to make the connection surface no clearance, and not be too tight, then put the bolt and nut welding resistance.